State
of the art ultrasonic technology allows you to obtain ultra
precise thickness measurements and store them to memory. This
digital tester is capable of reading wall thickness down to
0.010" with a super high adjustable resolution of up to
0.0001". This dynamic sonic gauge is designed to measure
the thickness of metallic and non-metallic materials such as
steel, aluminum, titanium, plastics, ceramics, glass and any
other good ultrasonic wage conductor as long as it has parallel
top and bottom surfaces. The UTG-2650 will accurately display
readings in either inch or millimeter after a simple calibration
to a known thickness or sound velocity. |
|
Specifications:
|
Model No. UTG-2650 |
Display
type |
4-digit
LCD w/Back Light |
Display Resolution |
Inch: 0.01", 0.001" or 0.0001" (selectable)
Metric: 0.1mm or 0.001mm (selectable) |
Measuring
Range |
Standard
Mode: 0.010" - 0.787" (steel) |
Accuracy |
+/-0.0002" (0.005mm)
if thickness < 3mm
+/-0.002" (0.05mm) if thickness < 20mm |
Sound
velocity range |
3280-32805
ft/s (1000-9999m/s) Adjustable |
Upper/Lower
Limit Preset Alarm |
Yes |
Operating
temperature |
32-122 degrees
F |
Refresh
Frequency |
4MHz up
to 25MHz |
Memory |
500 Test
Values |
Output |
N/A |
Power
supply |
AA alkaline
batteries (2pc) |
Battery
life |
Approx.
200 hours (w/backlight off) |
Power
consumption |
Working
current is less than 3V |
Dimensions |
5.86” x
2.87” x 1.25” (149 x 73 x 32mm) |
Weight |
5.6oz (160g) |
UTG-2650 comes complete with Certificate of Calibration, Operation
Manual and Custom Carry Case. |
|
|